Wooden Camera 159500 Manual download pdf

Included:

(5) Screw packs*:

(4) M4x12mm socket caps

(for attaching to camera brain)

(6) M3x14mm Phillips pan head

(RED/Blueshape)

(4) M3x12mm Phillips pan head

(Anton Bauer QRC)

(4) M3x8mm Phillips

(IDX/Swit)

*see screw chart & diagram below

FIXED BACK

1. Locate and align M4 HOLES on CAMERA BODY and

FIXED BACK.

2. Select and tighten M4 SOCKET caps with allen

wrench to attach FIXED BACK to CAMERA BODY.

3. Select and align BATTERY PLATE to FIXED BACK,

locate and tighten proper SCREWS using SCREW

CHART below.

4. Attach LEMO to POWER PORT.

FIXED BACK can only be attached to camera brain.

CAMERA BODY

FRONT

A= Camera Brain- M4x12mm socket caps

B= RED/Blueshape- M3x14mm Phillip

C= Swit/IDX- M3x8mm Phillips

D= Anton Bauer QRC- M3x12mm Phillips

Find appropriate screws and threaded holes by using

the SCREW CHART below. Insert and tighten into

corresponding hole as shown on HOLE DIAGRAM.

SCREW CHART

HOLE DIAGRAM

BACK

Included:(5) Screw packs*: (4) M4x12mm socket caps (for attaching to camera brain) (6) M3x14mm Phillips pan head (RED/Blueshape) (4) M3x12mm

No comments

Wooden Camera 159500 Manual